What do we prioritize with LLQ?

ccnp-dump
ccnp-route-dump
ccnp-route

#1

What do we prioritize with LLQ?
A. Voice
B. Data
C. Video
D. Babu sa staku
E. Queues

Correct Answer: AC

Explanation:
Low Latency Queueing with Priority Percentage Support

Specifying the Bandwidth Percentage: Example
The following example uses the priority percent command to specify a bandwidth percentage of 10 percent for the class called voice-percent. Then the bandwidth remaining percent command is used to specify a bandwidth percentage of 30 percent for the class called data1, and a bandwidth percentage of 20 percent for the class called data2.

Router> enable
Router# configure terminal
Router(config)# policy-map policy1
Router(config-pmap)# class voice-percent
Router(config-pmap-c)# priority percent 10
Router(config-pmap-c)# class data1
Router(config-pmap-c)# bandwidth remaining percent 30
Router(config-pmap-c)# class data2
Router(config-pmap-c)# bandwidth remaining percent 20
Router(config-pmap-c)# end

As a result of this configuration, 10 percent of the interface bandwidth is guaranteed for the class called voicepercent. The classes called data1 and data2 get 30 percent and 20 percent of the remaining bandwidth, respectively.