Which interface configuration output can be applied to the corporate router to allow communication to the remote sites?

ccnp-dump
ccnp-route-dump
ccnp-route

#1

A company has just opened two remote branch offices that need to be connected to the corporate network.
Which interface configuration output can be applied to the corporate router to allow communication to the
remote sites?

  • A. interface Tunnel0
    bandwidth 1536
    ip address 209.165.200.230 255.255.255.224
    tunnel source Serial0/0
    tunnel mode gre multipoint
  • B. interface fa0/0
    bandwidth 1536
    ip address 209.165.200.230 255.255.255.224
    tunnel mode gre multipoint
  • C. interface Tunnel0
    bandwidth 1536
    ip address 209.165.200.231 255.255.255.224
    tunnel source 209.165.201.1
    tunnel-mode dynamic
  • D. interface fa 0/0
    bandwidth 1536
    ip address 209.165.200.231 255.255.255.224
    tunnel source 192.168.161.2
    tunnel destination 209.165.201.1
    tunnel-mode dynamic

Correct Answer: A

Explanation:
The configuration of mGRE allows a tunnel to have multiple destinations. The configuration of mGRE on one
side of a tunnel does not have any relation to the tunnel properties that might exist at the exit points. This
means that an mGRE tunnel on the hub may connect to a p2p tunnel on the branch. Conversely, a p2p GRE
tunnel may connect to an mGRE tunnel. The distinguishing feature between an mGRE interface and a p2p
GRE interface is the tunnel destination. An mGRE interface does not have a configured destination. Instead the GRE tunnel is configured with the command tunnel mode gre multipoint. This command is used instead of the tunnel destination x.x.x.x found with p2p GRE tunnels. Besides allowing for multiple destinations, an mGRE tunnel requires NHRP to resolve the tunnel endpoints. Note, tunnel interfaces by default are point-topoint (p-p) using GRE encapsulation, effectively they have the tunnel mode gre command, which is not seen in the configuration because it is the default.
The mGRE configuration is as follows:
!
interface Tunnel0
bandwidth 1536
ip address 10.62.1.10 255.255.255.0
tunnel source Serial0/0
tunnel mode gre multipoint